TUTORIAL ARDUINO 3 – COLLEGARE DISPLAY LCD

COLLEGARE DISPLAY LCD  ARDUINO

SKETCH:

#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins

LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

void setup() {

  // set up the LCD’s number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print(“http://otravezzzz.blogspot.it!!”);
  delay(1000);
}

void loop() {

  // scroll 13 positions (string length) to the left
  // to move it offscreen left:
  for (int positionCounter = 0; positionCounter < 13; positionCounter++) {
    // scroll one position left:
    lcd.scrollDisplayLeft();
    // wait a bit:
    delay(150);
  }

// scroll 29 positions (string length + display length) to the right

  // to move it offscreen right:
  for (int positionCounter = 0; positionCounter < 29; positionCounter++) {
    // scroll one position right:
    lcd.scrollDisplayRight();
    // wait a bit:
    delay(150);
  }

// scroll 16 positions (display length + string length) to the left

  // to move it back to center:
  for (int positionCounter = 0; positionCounter < 16; positionCounter++) {
    // scroll one position left:
    lcd.scrollDisplayLeft();
    // wait a bit:
    delay(150);
  }

// delay at the end of the full loop:

  delay(1000);

}

PER CAMBIARE TESTO BASTA MODIFICARE LA STRINGA “lcd.print(“http://otravezzzz.blogspot.it!!”);”
PER REGOLARE LA VELOCITA’ DI SCORRIMENTO CAMBIARE LA STRINGA ”  delay(150) /  delay(150) / delay(1000)”
 

BUON DIVERTIMENTO!!!!!

Precedente Coming Soon........ Successivo ARDUINO LEGGERE DATI POTENZIOMETRO

Lascia un commento

*